ZAPI CONTROLLERS

AC-0

<<< back to main menu

<<< back to ZAPI menu

description

Small inverter for AC asynchronous 3-phase motors.
Equipped with CAN-bus interface.
Power: 1.2kW, 1.8kW
Voltages: 24V, 36V
Max. current: 150A RMS
Booster current: 170A RMS
Operating frequency: 8Khz

error codes

LED Description
1 BLINK EEPROM or logic or watchdog circuit fault
2 BLINKS Wrong starting sequence or double direction request
3 BLINKS Phase voltage or capacitor charge failed
4 BLINKS Accelerator voltage failure
5 BLINKS Motor phase current fault
6 BLINKS Contactor or AUX output driver fault (MDI coils too)
7 BLINKS Excessive controller temperature
8 BLINKS Can-bus KO
LONG BLINK Discharged battery