ZAPI CONTROLLERS

EPS-AC0

<<< back to main menu

<<< back to ZAPI menu

description

Steering controller for AC asynchronous 3-phase motors with CAN-BUS.
Voltages: 24V, 36V
Max. current: 50A
Operating frequency: 8kHz with center aligned PWM

error codes

RED LED Description
1 BLINK Slave processor error, safety contact fault
2 BLINKS Power unit failure, phase voltage is wrong, motor locked, CAN error
3 BLINKS Steer sensor error, feedback error
4 BLINKS EEPROM or watchdog error
5 BLINKS Too high temperature
6 BLINKS Current sensor defective, wrong phase current or voltage
32 BLINKS Motor data acquisition process