ZAPI CONTROLLERS
EPS-DC
description
DC motor power steering (with position control card).
Voltages: 24V, 36V, 48V, 72V
Operating frequency: 18Khz
error codes
| RED LED | Description |
| 1 BLINK | Auxiliary card: no wheel movement, feedback potentiometer fault |
| 2 BLINKS | Motor power part error, fuse fault |
| 3 BLINKS | Tachometric dynamo failure |
| 4 BLINKS | EEPROM or watchdog error |
| 5 BLINKS | Thermal threshold exceeded, T > 70 deg. C |
| 6 BLINKS | Current sensor defective |
| 7 BLINKS | Lower thermal threshold exceeded, T > 64 deg. C |
| 8 BLINKS | Motor shutdown |