ZAPI CONTROLLERS
H0
description
Small chopper for DC series excited motors
Power: 1.5kW , 2.2kW
Voltages: 24V, 36V
Max. current (24V): 230A
Max. current (36V): 180A
Booster current: 260A (24V), 210A (36V)
Operating frequency: 16Khz
error codes
| RED LED | Description |
| 1 BLINK | EEPROM error, wrong parameters, watchdog circuit has been trigerred |
| 2 BLINKS | Incorrect start, wrong sequence - eg. keyswitch, directions, accelerator, function switch active after key-on |
| 3 BLINKS | Wrong VMN output voltage, short to B- |
| 4 BLINKS | Accelerator high in standby |
| 5 BLINKS | Error in read motor current, sensor inside controller |
| 6 BLINKS | Malfunction of contactor driver circuit |
| 7 BLINKS | Temperature too high, more than 76 deg. C |
| 8 BLINKS | Contactors do not close, error in coil driver circuit |
| 9 BLINKS | Tiller or inversion switch active at starting |
| 32 BLINKS | Battery discharged |
| ON | Forward and reverse input, both active |