ZAPI CONTROLLERS

L1

<<< back to main menu

<<< back to ZAPI menu

description

Chopper for series motors.
Power: 500W to 1600W
Voltages: 24V
Max. current: 220A
Current booster: 280A
Operating frequency: 300Hz

error codes

RED LED Description
1 BLINK EEPROM error, wrong parameters, watchdog circuit has been trigerred
2 BLINKS Incorrect start, wrong sequence - eg. keyswitch, directions, accelerator, function switch active after key-on
3 BLINKS Wrong VMN output voltage, short to B-
4 BLINKS Accelerator high in standby
5 BLINKS Error in read motor current, sensor inside controller
6 BLINKS Malfunction of contactor driver circuit
7 BLINKS Temperature too high, more than 73 deg. C
8 BLINKS Contactor don't open or VMN voltage is high in stanby
32 BLINKS Battery low
ON Forward and reverse direction inputs are both active