ZAPI CONTROLLERS

SEM3D

<<< back to main menu

<<< back to ZAPI menu

description

Chopper for DC separately excited motors
Power: 6.0kW to 12kW
Voltages: 48V, 80V, 96V
Max. current: 400A to 600A
Field frequency: 1Khz
Armature frequency: 16Khz

error codes

RED LED Description
1 BLINK EEPROM error, logic error
2 BLINKS Incorrect start, wrong sequence, function switch active after key-on, handbrake
3 BLINKS No capacitor charge, wrong VMN or field voltage
4 BLINKS Accelerator high in standby, accelerator wire open
5 BLINKS Error in read motor armature or motor field current
6 BLINKS Malfunction of contactor driver circuit, contactor closed
7 BLINKS Thermal protection
32 BLINKS Battery low